Chem Reports projects that the Purging Compound market will grow steadily from 2025 to 2035, increasing from USD XX million in 2025 to USD XX million by 2035, at an estimated CAGR of XX%. The study uses 2024 as the base year, with market forecasts spanning 2025–2035.
1. Market overview
The Purging Compound market focuses on specialized formulations used to clean plastic processing equipment such as injection molding machines, extrusion lines, and blow molding systems. These compounds remove residual polymers, colorants, additives, degraded material, and contaminants from barrels, screws, hot runners, and dies, helping reduce changeover time, scrap, and defect rates.
Growth is driven by increased demand for high‑efficiency production, more frequent color and material changes, stricter quality requirements, and pressure to cut downtime and waste in plastics processing. Adoption is rising across packaging, automotive, consumer goods, electronics, and medical plastics, where consistent quality and rapid changeovers are critical. Chem Reports projects that the Purging Compound market will grow from USD XX million in 2025 to USD XX million by 2035, at an estimated CAGR of XX%, with 2024 as the base year and historical data from 2020–2024.
2. Market segmentation
2.1 By type
2.2 By process
2.3 By end-use industry (downstream plastics applications)
2.4 By region
3. Key players
These players compete on cleaning effectiveness, compatibility with different resins and processes, ease of use, required purge time and quantity, impact on machine wear, regulatory compliance (e.g., food contact grades), and technical support.
4. SWOT analysis
4.1 Strengths
4.2 Weaknesses
4.3 Opportunities
4.4 Threats
5. Porter’s Five Forces analysis
5.1 Competitive rivalry — High
5.2 Threat of new entrants — Moderate
5.3 Bargaining power of suppliers — Low to moderate
5.4 Bargaining power of buyers — High
5.5 Threat of substitutes — Moderate to high
6. Strategic implications (brief)
The primary objective of this report is to provide readers with a clear and comprehensive understanding of the Purging Compound market—its definition, segmentation, growth potential, influential trends, and the challenges shaping its development. Extensive research and analysis were conducted during the preparation of this study. All data and insights were sourced from credible references such as company websites, annual reports, industry journals, and expert interviews, and were thoroughly validated by industry specialists. Visual tools including charts, graphs, and diagrams are used throughout the report to enhance clarity and support data interpretation.
Points Covered in the Report
Key Reasons to Purchase
Chapter 1 Industry Overview
1.1 Definition
1.2 Brief Introduction by Major Type
1.2.1 Extrusion
1.2.2 Injection Molding
1.2.3 Blow Molding
1.2.4
1.2.5
1.2.6
1.2.7
1.2.8
1.2.9
1.3 Brief Introduction by Major Application
1.3.1 Mechanical Purging
1.3.2 Chemical/Foaming Purging
1.3.3 Liquid Purging
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
1.3.9
1.4 Brief Introduction by Major Regions
1.4.1 United States
1.4.2 Europe
1.4.3 China
1.4.4 Japan
1.4.5 India
1.5 Brief Introduction by Major
1.5.1
1.5.2
1.5.3
1.5.4
1.5.5
1.5.6
1.5.7
1.5.8
1.5.9
1.6 Brief Introduction by Major
1.6.1
1.6.2
1.6.3
1.6.4
1.6.5
1.6.6
1.6.7
1.6.8
1.6.9
1.7 Brief Introduction by Major
1.7.1
1.7.2
1.7.3
1.7.4
1.7.5
1.7.6
1.7.7
1.7.8
1.7.9
1.8 Brief Introduction by Major
1.8.1
1.8.2
1.8.3
1.8.4
1.8.5
1.8.6
1.8.7
1.8.8
1.8.9
Chapter 2 Production Market Analysis
2.1 Global Production Market Analysis
2.1.1 Global Capacity, Production, Capacity Utilization Rate, Ex-Factory Price, Revenue, Cost, Gross and Gross Margin Analysis
2.1.2 Major Manufacturers Performance and Market Share
2.2 Regional Production Market Analysis
2.2.1 Regional Market Performance and Market Share
2.2.2 United States Market
2.2.3 Europe Market
2.2.4 China Market
2.2.5 Japan Market
2.2.6 India Market
2.2.7 Market
Chapter 3 Sales Market Analysis
3.1 Global Sales Market Analysis
3.1.1 Global Sales Volume, Sales Price and Sales Revenue Analysis
3.1.2 Major Manufacturers Performance and Market Share
3.2 Regional Sales Market Analysis
3.2.1 Regional Market Performance and Market Share
3.2.2 United States Market
3.2.3 Europe Market
3.2.4 China Market
3.2.5 Japan Market
3.2.6 India Market
3.2.7 Market
Chapter 4 Consumption Market Analysis
4.1 Global Consumption Market Analysis
4.1.1 Global Consumption Volume Analysis
4.2 Regional Consumption Market Analysis
4.2.1 Regional Market Performance and Market Share
4.2.2 United States Market
4.2.3 Europe Market
4.2.4 China Market
4.2.5 Japan Market
4.2.6 India Market
4.2.7 Market
Chapter 5 Production, Sales and Consumption Market Comparison Analysis
5.1 Global Production, Sales and Consumption Market Comparison Analysis
5.2 Regional Production, Sales Volume and Consumption Volume Market Comparison Analysis
5.2.1 United States
5.2.2 Europe
5.2.3 China
5.2.4 Japan
5.2.5 India
5.2.6
Chapter 6 Major Manufacturers Production and Sales Market Comparison Analysis
6.1 Global Major Manufacturers Production and Sales Market Comparison Analysis
6.1.1 Global Major Manufacturers Production and Sales Market Comparison
6.2 Regional Major Manufacturers Production and Sales Market Comparison Analysis
6.2.1 United States
6.2.2 Europe
6.2.3 China
6.2.4 Japan
6.2.5 India
6.2.6
Chapter 7 Major Type Analysis
7.1 Major Type Market Share
7.2 Extrusion
7.3 Injection Molding
7.4 Blow Molding
7.5
7.6
7.7
7.8
7.9
7.10
Chapter 8 Major ApplicationAnalysis
8.1 Major Application Market Share
8.2 Mechanical Purging
8.2.1 Sales Analysis
8.3 Chemical/Foaming Purging
8.3.1 Sales Analysis
8.4 Liquid Purging
8.4.1 Sales Analysis
8.5
8.5.1 Sales Analysis
8.6
8.6.1 Sales Analysis
8.7
8.7.1 Sales Analysis
8.8
8.8.1 Sales Analysis
8.9
8.9.1 Sales Analysis
8.10
8.11.1 Sales Analysis
Chapter 9 Industry Chain Analysis
9.1 Up Stream Industries Analysis
9.1.1 Raw Material and Suppliers
9.1.2 Equipment and Suppliers
9.2 Manufacturing Analysis
9.2.1 Manufacturing Process
9.2.2 Manufacturing Cost Structure
9.2.3 Manufacturing Plants Distribution Analysis
9.3 Industry Chain Structure Analysis
Chapter 10 Global and Regional Market Forecast
10.1 Production Market Forecast
10.1.1 Global Market Forecast
10.1.2 Major Region Forecast
10.2 Sales Market Forecast
10.2.1 Global Market Forecast
10.2.2 Major Classification Forecast
10.3 Consumption Market Forecast
10.3.1 Global Market Forecast
10.3.2 Major Region Forecast
10.3.3 Major Application Forecast
Chapter 11 Major Manufacturers Analysis
11.1 DOW Chemical Company
11.1.1 Company Introduction
11.1.2 Product Specification and Major Types Analysis
11.1.3 Production Market Performance
11.1.4 Sales Market Performance
11.1.5 Contact Information
11.2 Formosa Plastics Corporation
11.2.1 Company Introduction
11.2.2 Product Specification and Major Types Analysis
11.2.3 Production Market Performance
11.2.4 Sales Market Performance
11.2.5 Contact Information
11.3 3M Company
11.3.1 Company Introduction
11.3.2 Product Specification and Major Types Analysis
11.3.3 Production Market Performance
11.3.4 Sales Market Performance
11.3.5 Contact Information
11.4 Asahi Kasei Chemicals Corporation
11.4.1 Company Introduction
11.4.2 Product Specification and Major Types Analysis
11.4.3 Production Market Performance
11.4.4 Sales Market Performance
11.4.5 Contact Information
11.5 Clariant AG
11.5.1 Company Introduction
11.5.2 Product Specification and Major Types Analysis
11.5.3 Production Market Performance
11.5.4 Sales Market Performance
11.5.5 Contact Information
11.6 Velox GmbH
11.6.1 Company Introduction
11.6.2 Product Specification and Major Types Analysis
11.6.3 Production Market Performance
11.6.4 Sales Market Performance
11.6.5 Contact Information
11.7 E. I. Du Pont De Nemours and Company
11.7.1 Company Introduction
11.7.2 Product Specification and Major Types Analysis
11.7.3 Production Market Performance
11.7.4 Sales Market Performance
11.7.5 Contact Information
11.8 Kuraray Co. Ltd.
11.8.1 Company Introduction
11.8.2 Product Specification and Major Types Analysis
11.8.3 Production Market Performance
11.8.4 Sales Market Performance
11.8.5 Contact Information
11.9 Daicel Corporation
11.9.1 Company Introduction
11.9.2 Product Specification and Major Types Analysis
11.9.3 Production Market Performance
11.9.4 Sales Market Performance
11.9.5 Contact Information
11.10 Dyna-Purge
11.10.1 Company Introduction
11.10.2 Product Specification and Major Types Analysis
11.10.3 Production Market Performance
11.10.4 Sales Market Performance
11.10.5 Contact Information
11.11 Chem-Trend
11.11.1 Company Introduction
11.11.2 Product Specification and Major Types Analysis
11.11.3 Production Market Performance
11.11.4 Sales Market Performance
11.11.5 Contact Information
11.12 Purgex
11.12.1 Company Introduction
11.12.2 Product Specification and Major Types Analysis
11.12.3 Production Market Performance
11.12.4 Sales Market Performance
11.12.5 Contact Information
11.13 Calsak Corporation
11.13.1 Company Introduction
11.13.2 Product Specification and Major Types Analysis
11.13.3 Production Market Performance
11.13.4 Sales Market Performance
11.13.5 Contact Information
11.14 Reedy Chemical Foam & Specialty Additives
11.14.1 Company Introduction
11.14.2 Product Specification and Major Types Analysis
11.14.3 Production Market Performance
11.14.4 Sales Market Performance
11.14.5 Contact Information
11.15 Magna Purge
11.15.1 Company Introduction
11.15.2 Product Specification and Major Types Analysis
11.15.3 Production Market Performance
11.15.4 Sales Market Performance
11.15.5 Contact Information
11.16 Rapidpurge
11.16.1 Company Introduction
11.16.2 Product Specification and Major Types Analysis
11.16.3 Production Market Performance
11.16.4 Sales Market Performance
11.16.5 Contact Information
11.17 Polyplast Muller GmbH
11.17.1 Company Introduction
11.17.2 Product Specification and Major Types Analysis
11.17.3 Production Market Performance
11.17.4 Sales Market Performance
11.17.5 Contact Information
11.18 Slide Products, Inc.
11.18.1 Company Introduction
11.18.2 Product Specification and Major Types Analysis
11.18.3 Production Market Performance
11.18.4 Sales Market Performance
11.18.5 Contact Information
11.19 ELM Grove Industries, LLC
11.19.1 Company Introduction
11.19.2 Product Specification and Major Types Analysis
11.19.3 Production Market Performance
11.19.4 Sales Market Performance
11.19.5 Contact Information
11.20 Ultra Plast Asia Co., Ltd
11.20.1 Company Introduction
11.20.2 Product Specification and Major Types Analysis
11.20.3 Production Market Performance
11.20.4 Sales Market Performance
11.20.5 Contact Information
11.21
Ultra System SA
11.21.1 Company Introduction
11.21.2 Product Specification and Major Types Analysis
11.21.3 Production Market Performance
11.21.4 Sales Market Performance
11.21.5 Contact Information
11.22
RBM Polymers
11.22.1 Company Introduction
11.22.2 Product Specification and Major Types Analysis
11.22.3 Production Market Performance
11.22.4 Sales Market Performance
11.22.5 Contact Information
11.23
Claude Bamberger Molding Compounds Corporation
11.23.1 Company Introduction
11.23.2 Product Specification and Major Types Analysis
11.23.3 Production Market Performance
11.23.4 Sales Market Performance
11.23.5 Contact Information
11.24
Purge Right
11.24.1 Company Introduction
11.24.2 Product Specification and Major Types Analysis
11.24.3 Production Market Performance
11.24.4 Sales Market Performance
11.24.5 Contact Information
11.25
Z Clean
11.25.1 Company Introduction
11.25.2 Product Specification and Major Types Analysis
11.25.3 Production Market Performance
11.25.4 Sales Market Performance
11.25.5 Contact Information
11.26
11.26.1 Company Introduction
11.26.2 Product Specification and Major Types Analysis
11.26.3 Production Market Performance
11.26.4 Sales Market Performance
11.26.5 Contact Information
11.27
11.27.1 Company Introduction
11.27.2 Product Specification and Major Types Analysis
11.27.3 Production Market Performance
11.27.4 Sales Market Performance
11.27.5 Contact Information
11.28
11.28.1 Company Introduction
11.28.2 Product Specification and Major Types Analysis
11.28.3 Production Market Performance
11.28.4 Sales Market Performance
11.28.5 Contact Information
11.29
11.29.1 Company Introduction
11.29.2 Product Specification and Major Types Analysis
11.29.3 Production Market Performance
11.29.4 Sales Market Performance
11.29.5 Contact Information
11.30
11.30.1 Company Introduction
11.30.2 Product Specification and Major Types Analysis
11.30.3 Production Market Performance
11.30.4 Sales Market Performance
11.30.5 Contact Information
11.31
11.31.1 Company Introduction
11.31.2 Product Specification and Major Types Analysis
11.31.3 Production Market Performance
11.31.4 Sales Market Performance
11.31.5 Contact Information
11.32
11.32.1 Company Introduction
11.32.2 Product Specification and Major Types Analysis
11.32.3 Production Market Performance
11.32.4 Sales Market Performance
11.32.5 Contact Information
11.33
11.33.1 Company Introduction
11.33.2 Product Specification and Major Types Analysis
11.33.3 Production Market Performance
11.33.4 Sales Market Performance
11.33.5 Contact Information
11.34
11.34.1 Company Introduction
11.34.2 Product Specification and Major Types Analysis
11.34.3 Production Market Performance
11.34.4 Sales Market Performance
11.34.5 Contact Information
11.35
11.35.1 Company Introduction
11.35.2 Product Specification and Major Types Analysis
11.35.3 Production Market Performance
11.35.4 Sales Market Performance
11.35.5 Contact Information
11.36
11.36.1 Company Introduction
11.36.2 Product Specification and Major Types Analysis
11.36.3 Production Market Performance
11.36.4 Sales Market Performance
11.36.5 Contact Information
11.37
11.37.1 Company Introduction
11.37.2 Product Specification and Major Types Analysis
11.37.3 Production Market Performance
11.37.4 Sales Market Performance
11.37.5 Contact Information
11.38
11.38.1 Company Introduction
11.38.2 Product Specification and Major Types Analysis
11.38.3 Production Market Performance
11.38.4 Sales Market Performance
11.38.5 Contact Information
11.39
11.39.1 Company Introduction
11.39.2 Product Specification and Major Types Analysis
11.39.3 Production Market Performance
11.39.4 Sales Market Performance
11.39.5 Contact Information
11.40
11.40.1 Company Introduction
11.40.2 Product Specification and Major Types Analysis
11.40.3 Production Market Performance
11.40.4 Sales Market Performance
11.40.5 Contact Information
Chapter 12 New Project Investment Feasibility Analysis
12.1 New Project SWOT Analysis
12.2 New Project Investment Feasibility Analysis
Chapter 13 Conclusions
Chapter 14 Appendix
Author List
Disclosure Section
Research Methodology
Data Source
Interview List
Global Disclaimer
2. Market segmentation
2.1 By type
2.2 By process
2.3 By end-use industry (downstream plastics applications)
2.4 By region
3. Key players
Upto 24 to 48 hrs (Working Hours)
Upto 72 hrs max (Working Hours) - Weekends and Public Holidays
Single User License - Allows access to only one person to the report.
Multi User License - Allows sharing with max 5 persons within organization.
Corporate License – Can be shared across entire organization.
Online Payments with PayPal
Wire Transfer / Bank Transfer
At ChemReports, we understand that business decisions can’t wait. Our research specialists are available anytime to answer your queries and guide you through our reports, ensuring quick and reliable assistance.
ChemReports provides 360° market analysis across materials, technologies, and global chemical sectors—helping you make confident business decisions.
We turn complex data into strategic insights to support fact-based decisions, market entry strategies, and competitive analysis.
Your personal and business information is completely secure with us. We value your trust and ensure strict confidentiality.
Need tailored insights? Our analysts provide custom reports built on authentic data and aligned with your specific business goals.